Debt-to-Equity Ratio: How to Check a Company’s Debt

The debt-to-equity ratio divides what a company owes by its shareholders’ equity, so a ratio of 1.5 means $1.50 of debt for every dollar of equity. It tells you how much of the business is funded by lenders rather than owners, but to judge whether the debt is a problem you also need interest coverage and the dates the loans come due.
Below are the two formulas you’ll meet, where to find each number in a filing, and a worked example on a hypothetical company that runs all the checks.
How is the debt-to-equity ratio calculated?
There are two versions in common use, and data sites don’t always say which one they show:
- Total liabilities ÷ shareholders’ equity. This is the formula in the SEC’s Beginners’ Guide to Financial Statements, which reads a ratio of 2 as “two dollars of debt to every one dollar shareholders invest in the company.”
- Total debt ÷ shareholders’ equity, counting only interest-bearing borrowings (short-term debt, the current part of long-term debt, and long-term debt). Corporate Finance Institute gives this version, with fixed payment obligations such as leases sometimes added.
The first version is always higher, because total liabilities include supplier bills, deferred revenue, pensions and taxes owed. Neither is wrong. Pick one, use it for every company and every year you compare, and check which one a screener uses before you compare its number with one you calculated yourself.
Where do you find the numbers?
Everything sits in the 10-K or 10-Q, free on the SEC’s EDGAR search. The balance sheet (Item 8 of the 10-K) gives total liabilities, the debt lines and shareholders’ equity. The debt footnote lists each loan and bond with its interest rate and maturity, usually with a table of how much falls due in each of the next five years. Item 7, management’s discussion and analysis, has a section on liquidity and capital resources that explains how the company plans to meet those payments.
The income statement gives the two numbers for interest coverage: operating income (often close to EBIT, earnings before interest and taxes) and interest expense. If you need a refresher on the statement layout, the balance sheet walkthrough covers each section.
What is a high debt-to-equity ratio?
It depends on the industry, because some businesses can carry far more debt safely than others. A utility with regulated prices and steady demand can service a high ratio that would sink a chip designer whose revenue can halve in a downturn. Banks run on borrowed money by design, so their debt-to-equity ratio isn’t comparable with an industrial company’s at all.
The useful comparisons are the company’s own history and its close competitors. A ratio that climbed from 0.4 to 1.5 in three years tells you the company changed how it funds itself, and the 10-K should explain why: an acquisition, buybacks paid with borrowed money, or losses that shrank equity.
Why do data sites show different ratios for the same company?
Besides the two formulas, providers differ on what counts as debt. Lease liabilities are the biggest swing item: since US accounting rules brought most operating leases onto the balance sheet, a retailer or airline can carry lease liabilities as large as its bonds. Some sites include them, some don’t. Others use the latest quarter while you used the annual report, or average the balance over the year.
When a number looks off, rebuild it from the filing. It takes two lines from the balance sheet and one division, and you’ll know which definition you’re looking at.
Watch the denominator as well as the debt. Equity falls when a company buys back shares or loses money, so the ratio can rise without any new borrowing. A company with negative equity, which happens after years of large buybacks, has a negative ratio that means nothing on its own. For those companies, the cash-flow checks below are the ones to use.
Can the company afford the interest?
Interest coverage answers that: operating profit (EBIT) ÷ interest expense. CFI notes the ratio is also called “times interest earned”, and some analysts use EBITDA instead of EBIT as the numerator. A coverage of 5 means operating profit could pay the year’s interest five times over. Below 1, the company isn’t earning enough from operations to pay its interest and is relying on cash reserves or new money.
Coverage moves in two directions at once in a bad year. Profit falls, and if the company has variable-rate debt or has to refinance at higher rates, interest rises. That’s why the next check matters.
When does the debt come due?
Read the maturity table in the debt footnote. A company with $500 million of debt due in 2034 is in a very different spot from one with the same $500 million due in 14 months. Debt due soon has to be repaid from cash, refinanced at whatever rate lenders charge at the time, or replaced with new shares.
Then compare the near-term maturities with the cash on hand and the cash the business generates. Net debt (total debt minus cash and short-term investments) is the amount the company couldn’t repay from its own cash today. Analysts often divide net debt by EBITDA to express it in years of earnings; the lower the number, the faster the debt could in principle be paid down. The free cash flow guide explains how to measure the cash that is left after capital spending.
A worked example: Calder Freight (hypothetical)
Calder Freight is a fictional trucking company. From its latest 10-K, in millions of dollars:
- Short-term debt $50, long-term debt $450. Total debt $500, at an average rate of 6%.
- Total liabilities $800. Shareholders’ equity $400. Cash $60.
- Operating profit (EBIT) $120. EBITDA $160. Interest expense $30.
- Debt maturing within two years: $150.
Debt-to-equity is $500 ÷ $400 = 1.25 counting borrowings, or $800 ÷ $400 = 2.0 on the SEC’s total-liabilities formula. Interest coverage is $120 ÷ $30 = 4.0 times. Net debt is $500 − $60 = $440 million, which is 2.75 times EBITDA.
Now stress it. Freight volumes fall and EBIT drops 40% to $72 million: coverage falls to 2.4 times. Suppose Calder also refinances the $150 million coming due at 9% instead of 6%. Interest rises by $150 million × 3% = $4.5 million to $34.5 million, and coverage slips to about 2.1 times. The business still pays its interest, but the margin for a second bad year is thin, and the $60 million of cash covers well under half of the debt due within two years.
How FinCoach AI checks a company’s debt
In FinCoach, the Analyze stock report has a “Balance sheet & debt analysis” section that runs these checks on a real ticker. It shows net cash (cash plus marketable securities minus all debt), the debt structure (short-term versus long-term, variable versus fixed rates), the D/E ratio and a crisis test of the pre-tax margin under pricing pressure. Each row gets a risk level and a short note written by Claude from Financial Modeling Prep fundamentals.
The D/E row carries a reminder that debt costs more at today’s interest rates than it did a decade ago when rates were near zero, so it applies a stricter standard than before. An “Ask AI” box under the section answers follow-up questions, such as what changed in the debt structure, using only that section’s data. It doesn’t read the maturity table in the footnotes, so check the 10-K for the dates before you draw conclusions; AI output can be wrong.
Keep reading
- How to read a balance sheet
- How to calculate free cash flow
- EV/EBITDA vs P/E: which valuation ratio to use when
- ROIC vs ROE: which return measure to trust
Educational, not financial advice. FinCoach AI is not a broker or investment adviser, and AI output can be wrong; check anything important before you act. Figures as of 22 November 2026; sources linked.
Run the debt checks on a company you follow. Launch the app.
Launch appFrequently asked questions
What is a good debt-to-equity ratio?
There is no universal good level, because industries differ. Utilities and other businesses with steady cash flows often carry higher ratios than technology or cyclical companies. Compare a company with its own history and its closest competitors.
Is a debt-to-equity ratio of 2 bad?
Not by itself. On the total-liabilities formula, a ratio of 2 is common for many established companies. It becomes a concern when interest coverage is low, a large share of the debt comes due soon, or the ratio has risen quickly without a clear reason.
What does a negative debt-to-equity ratio mean?
It means shareholders’ equity is below zero, usually after years of losses or large buybacks. The ratio stops being meaningful, so look at interest coverage, net debt and free cash flow instead.
What is the difference between debt-to-equity and interest coverage?
Debt-to-equity compares the size of the debt with the owners’ stake on the balance sheet. Interest coverage compares operating profit with the yearly interest bill, so it tells you whether the company can afford the debt it has.
How do I find when a company’s debt matures?
Read the debt footnote in the company’s 10-K annual report. It lists each loan and bond with its interest rate, and most companies include a table of how much debt falls due in each of the next five years.
This article is for educational and informational purposes only and is not financial, investment, tax or legal advice. FinCoach AI is not a broker or registered investment adviser. Investing involves risk, including the possible loss of capital. Do your own research and consider a licensed professional before acting. See our Terms.